Description
High quality GNSS antenna covering all the L1/L2/L5 bands supported by the PX1105R based TinkerNav board. The antenna has a high 28 dB LNA gain, which gives you better signal for RTK calculations in difficult areas. SMA antenna connection to interface with TinkerNav.
Receiver and Antenna Frequencies
Many GNSS antennas available do not support all the frequencies that TinkerNav supports. It is possible to use any inexpensive L1 antenna, but L1/L5 multi-band antennas provide more satellites with faster more stable RTK solutions.
The L1/L2/L5 Multi-Band GNSS Antenna supports all frequencies used by the PX1105R receiver.
Additional Antenna Parameters
Antenna gain and other properties are shown below. The Low Noise Amplifier (LNA) gain is an important parameter in antennas used for RTK applications since raising the signal to noise ratio of satellite signals is important to maintaining an RTK solution.
Physical Properties
The antenna includes an adhesive mount on the underside to mount to most surfaces. The lack of magnetic connections ensures it won’t interfere with magnetometer sensors. The cable is 3 meters long with an SMA connector at the end.
Reviews
There are no reviews yet.